Feeds:
Posts
Comments

Posts Tagged ‘Christmas tree skirts’

As I roamed through store after store one year searching for a Christmas tree skirt that was proportional to my large tree and that matched my decor, I became frustrated because all I could find were dinky little tree skirts at exorbitant prices. Then a thought occurred to me, “What about using a round tablecloth as a tree skirt?”

Tablecloths can be found in a variety of diameters, fabrics, and colors and you’re more likely to find a tablecloth that matches your home’s decor than a tree skirt! Consider purchasing a round tablecloth at stores like T.J. Maxx, Ross, Marshall’s or Tuesday Morning.

Here’s how I convert tablecloths into tree skirts:
1. Fold the tablecloth in half, then in quarters, and finally in eighths.
2. With a pair of fabric scissors or very sharp scissors, cut the point off the top of the folded fabric following the curve of the hemmed edge to create the hole for the tree trunk. Depending on the diameter of your tree trunk you’ll want to cut about one to two inches from the point, because when you finally open up the fabric, you’ll have a two to four inch hole.
3. Next while the fabric is still folded in eighths, cut a fold from the bottom of the hem all the way up to the cut you just made. This provides an opening in the tablecloth that enables you to drape it around the tree.
4. Using Mighty Mendit, a product advertised on television, you can glue some type of braiding or trim around the raw edge of the center hole and the two cut edges of the side opening. An alternative to this is folding the raw edges under a half-inch and hemming them on your sewing machine. A third option is to just leave the edges raw and tuck them under every year so that no one notices them. As you can probably guess, this is the option I’ve always chosen!

Note: The photo shows a 70″ round tablecloth around the base of a 9′ tree.

Read Full Post »

%d bloggers like this: