The model napped during the construction and fitting of the garment, so a giraffe graciously stepped in to help. What? After using a sweater to make a Christmas stocking last month, I wanted to learn additional ways to reuse old sweaters. I searched for ideas online and found the site Make It and Love It, which had some cute examples. Making a “sweater” cap is easy. By the time my granddaughter woke up from her nap, I’d fashioned a beanie cap for her. It’s a little large for her right now, but it looks great on the giraffe. I’m going to make an argyle cap tomorrow. Hopefully the model will be awake!
How to Transform a Sweater into a Beanie Cap
MATERIALS
Old sweater with ribbing at the bottom
Paper and pen for pattern
Thread
Pins
Scissors
Sewing machine
INSTRUCTIONS
1. Using an existing hat that fits, flatten it out and place it on a piece of paper. Trace around the perimeter of the hat with a pencil or pen. Draw a 1/4″ seam allowance alongside the first outline. Cut out the pattern.
2. Lay the sweater on a flat surface and place the pattern on top of it. The bottom edge of the pattern should be flush with the bottom edge of the sweater hem/ribbing. Pin pattern in place. Cut around the pattern making sure to cut through both layers of the sweater. Note: In this photo, I used the half of a sweater leftover from the Christmas stocking project. That’s why the sweater looks so narrow. 
3. To make the bow feature, cut an additional piece of sweater at least 1.5 inches longer than the width of the base of the beanie and about 3 to 4 inches tall.
4. Cut a smaller piece for the center of the bow.
5. Fold each bow piece in half lengthwise with right sides touching. Sew 1/8″ seams. Turn both pieces right side out. Place the small piece around the center of the long piece, making sure all seams are facing towards the back. Pin together and stitch the small piece as close to long piece as possible. Cut off excess length on the short piece. 
6. Lay one of the cap pieces right side up on a flat surface. Place the constructed bow on top of it, making sure it is centered and the seam side is down. Pin it in place. Place the other cap piece right side down on top of the bow and pin all three layers together. Sew all layers together using a 1/4″ seam allowance. Trim excess bow fabric that sticks out beyond the seam. 
7. Turn beanie cap right side out. Embellish with button, if desired.
LINNELL’S NOTES
1. I don’t have a serger, so I used a stretch stitch on my sewing machine. Working with a cable knit was more difficult for a first-time attempt. I recommend experimenting with a smooth knit first.
2. If you don’t want to include the bow feature, just omit the steps related to bow construction and placement.
Enjoy!
What about this? 